ISO Interpreter Booths

Portable interpreter booth accommodating for two interpreters

The ISO Portable Interpreter Booth provides working accommodation for two interpreters.

The whole booth can be assembled by means of hook fastenings. Only one person is required to transport and assemble the booth due to the dimensions and weights of the individual modules.

The modules are linked by hooks that can by fastened by means of a hexagon socket screw wrench (type 7), which is stored below the working surface. The vertical modules are made of a robust outer hardwood frame which surrounds a central panel made of a soundproofing laminate material. 

The inside surface is covered with a robust, sound-absorbing felt material, helping to avoid scratching when the booth modules are stacked for storage or transportation. The door has a rubber seal for optimum sound-proofing.

The booth has soundproofing values better than those required by the ISO 4043 standard. The difference in sound pressure level (D) on the outside for sound originating in the room is at least equal to the following table:

Frequency in Hz

250

500

- 1.000

2.000

4.000

D in dB

26

31

33

37

34

 

The booth is designed to take two low noise tangential fans, which are placed in the roof modules and ensure that there is an adequate circulating air. In addition, two reading lamps should be provided for each booth.

 

 

 

Our system is designed to accommodate two interpreters (each 80cm width), but can be put together to suit up to three.

Its working-surface module (50cm depth) is fitted inside (working height 73cm). It contains a shelf below the table for the interpreter's documents, and an invisible cable trunk at the end of the table to provide easy connection to the interpreter consoles.

In addition to the standard modules, the M83D simply needs an additional roof module and a larger working surface. The sides, door and window modules can be freely combined. The door can be installed on either side of the booth or at the back.

Key features:

  • Occupies a surface area of 170cmx170cm
  • eight is 204cm (external measurements)
  • Made up of three modular side panels (80.5x201cm), 4 windows modules (80.5x201cm), 1 door module (80.5x201cm), and 2 roof modules (85x170cm).
  • 3 types of vertical modules: side wall modules, door modules with permanently hinged booth door, and window modules which are glazed with shatterproof safety glass
  • Outside surface has a hard-wearing finish

 

Interpreter Booth M83H

Product Description

need to know more? call 01223 411601 or email info@buk.solutions